Nvidia Graphics Card Not Detecting Hdmi. If so when using the nvidia card you should uninstall the amd drivers. Ignore nvidia control panel for a bit and check the windows settings, there you should be able to see and manage the monitors, windows might be set up to do certain things in certain situations due to its game mode etc.
Project your screen on second monitor (please check method 1) method 5: Here is how you can do it. Some models of the new geforce 400 series gpus include a mini hdmi port.
I Used It For My Hdmi Output, And It Started To Work Perfectly.
Thanks for everything, you were right. Tried differenct hdmi cables, not working. If your nvidia graphics card is disabled, you will see a greyed out option.
From The Windows Settings, I Can See That Monitor 1 (Laptop Screen) Is Connected To Intel.
In this method, you will reinstall your monitors. Installed the new driver and had the same result. I have bought a new monitor full hd 1920*1080, hdmi signal undetected.
Run Ddu (See Settings Below).]Select:
The video card has a dual dvi, i turned off the pc and plugged into the second dvi output, started the pc back up and the picture was back. Do this by opening the intel graphics control panel. Tried turning everything off, plugging in the hdmi cable, then turning everything back on.
Your Only Solution Is To Disable One Of The Gpu And Then Install The Correct Driver For The Other One.
Click start menu and type nvidia control panel; Right click the current display adapter. Ignore nvidia control panel for a bit and check the windows settings, there you should be able to see and manage the monitors, windows might be set up to do certain things in certain situations due to its game mode etc.
Right Click On Graphic Card And Select Disable;
Enter the device manager and look for the driver hdmi of the graphics card, i put on the driver and in compatible drivers, the driver that i used before it was a generic windows appeared. Use these steps to open and use the nvidia graphics card software: Clean, do not restart search (runbox) > msconfig > boot (tab) > boot option> un check the safe boot.