How To Secure Cisco Catalyst Switches

How To Secure Cisco Catalyst Switches. The console port is secured by setting a timeout value along with assigning the previously configured. A recent technical paper from cisco explains for network technicians how to secure wiring closets using the company's ubiquitous catalyst switches.

Cisco Catalyst 2960 Series Switches Cisco Catalyst 2960
Cisco Catalyst 2960 Series Switches Cisco Catalyst 2960 from

When converting a cisco catalyst 9600 series switch from standalone mode to svl mode for the first time, one of the switches boots up or resets, for resolving the switch number conflict and sets the switch_number environment variable to 2. Switch> (enable) set port security 3/1 maximum 10. Console> (enable) set port security 4/7 maximum 20.

Set The Number Of Mac Addresses To Be Secured On A Port.

The following are the prerequisites for configuring the switch for secure shell (ssh): This is how we can do it: Attach rogue laptop to any unused switch port and notice that the link lights are red.

Port Security Violation On Port 3/1 Will Cause Insecure Packets To Be Dropped

The encrypted packets were dropped if wan macsec was configured on the end devices with. You can use the port security feature to restrict input to an interface by limiting and identifying mac addresses of the stations allowed to access the port. For ssh to work, the switch needs an rsa public/private key pair.

The Proxy In Turn References Both Your Current Radius Server As Well As The Duo Cloud For Primary And Secondary Authentication.

Switch> (enable) set port security 3/1 violation restrict. To delete the rsa key pair, use the crypto key zeroize rsa global configuration command. Once the switch sees another mac address on the.

The Default Port Number Is 443.

First of all passwords are configured. This key pair automatically enables ssh and remote authentication when the crypto key generate rsa command is entered in global configuration mode. The secure copy protocol (scp) feature provides a secure and authenticated method for copying switch configurations or switch image files.

Cisco Is Continuously Raising The Bar For Security, And Security Feature Availability At Layer 2 Is No Exception.

Our internet supply is always stable. Verify port security is enabled and the mac addresses of pc1 and pc2 were added to the running configuration with “ show run ” command. Enable the port and verify that rogue laptop can ping pc1 and pc2.