Cisco Router Factory Reset Command

Cisco Router Factory Reset Command. While holding the reset button, power up the router. Factory reset on cisco router or switch ios.

Cisco 1941 Router How to Factory Reset
Cisco 1941 Router How to Factory Reset from www.hardreset99.com

The factory reset is a process of clearing the current running and startup configuration information on a router, and resetting the router to an earlier, fully functional state. If you are prompted for initial configuration dialogue, type no. You should now see a router(config)# prompt.

[Confirm] The Following Will Be Deleted As A Part Of Factory Reset:

At the prompt, type the following command to restart the router: The router is now reset back to the original factory defaults. This is example, we are going to be using a cisco 2950.

This Model Has A Reset Button On It That Can Be Pressed.

Press and hold the reset button while you power on the router. After the loading has stopped, press return to be taken to the main prompt. You should now see a router(config)# prompt.

You Next Need To Put Confreg Back Otherwise The Router Will Ignore The New Settings You Have Overwritten.

The factory reset is a process of clearing the current running and startup configuration information on a router, and resetting the router to an earlier, fully functional state. At the user mode (switch>) it will not execute a flash_init command! We are writing this tutorial to help you resetting a catalyst switches to factory defaults.

To Change The Configurations Of The Switch, We Will Need To Connect To The Switch Through The Console Terminal.

Now we are ready to move on to the last step. Type write erase to issue the erase comment. Release the reset button after 10 seconds.

After The Router Boots, Issue The Enable Command At The Router > Prompt.

Type y to confirm erase command. In the global configuration mode, create a hostname first on the router as we will use it for verification if the router is already reset into the factory settings. Copy the startup config to the running config.